Creating Vlans - SMC Networks 8748L2 Management Manual

C
ONFIGURING THE
CLI – Current VLAN information can be displayed with the following
command.
Console#show vlan id 1
VLAN Type
---- ------- ----------- ------
1 Static
Console#

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To
propagate information about VLAN groups used on this switch to
external network devices, you must specify a VLAN ID for each of these
groups.
Command Attributes
• Current – Lists all the current VLAN groups created for this system.
Up to 255 VLAN groups can be defined. VLAN 1 is the default
untagged VLAN.
• New – Allows you to specify the name and numeric identifier for a
new VLAN group. (The VLAN name is only used for management on
this system; it is not added to the VLAN tag.)
• VLAN ID – ID of configured VLAN (1-4094, no leading zeroes).
• VLAN Name – Name of the VLAN (1 to 32 characters).
• Status (Web) – Enables or disables the specified VLAN.
- Enable: VLAN is operational
- Disable: VLAN is suspended; i.e., does not pass packets.
• State (CLI) – Enables or disables the specified VLAN.
- Active: VLAN is operational.
- Suspend: VLAN is suspended; i.e., does not pass packets.
• Add – Adds a new VLAN group to the current list.
3-136
S
WITCH
Name Status
DefaultVlan Active Eth1/1
Ports/Channel groups
------------------------------------
Eth1/2 Eth1/3
Eth1/6 Eth1/7 Eth1/8
Eth1/11 Eth1/12 Eth1/13 Eth1/14 Eth1/15
Eth1/16 Eth1/17 Eth1/18 Eth1/19 Eth1/20
Eth1/21 Eth1/22 Eth1/23 Eth1/24
4-193
Eth1/4 Eth1/5
Eth1/9 Eth1/10