Whichboot; Table 4-26 File Directory Information - SMC Networks 8748L2 Management Manual

C L
OMMAND INE
Command Usage
• If you enter the command dir without any parameters, the system
displays all files.
• A colon (:) is required after the specified unit number.
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information.
Console#dir
-------------------------------- -------------- ------- -----------
Unit1:
Factory_Default_Config.cfg
-------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered
up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
4-88
I
NTERFACE

Table 4-26 File Directory Information

Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config
file.
Shows if this file is used when the system is started.
The length of the file in bytes.
file name
diag_0060 Boot-Rom image
run_01642 Operation Code
run_0200 Operation Code
file type startup size (byte)
Config File
startup Config File
Y
N
Y
N
Y
Total free space:
111360
1074304
1083008
2574
2710
0