Default Setting - SMC Networks 8748L2 Management Manual

Syntax
[no] {permit | deny} [protocol-number | udp]
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[source-port sport [end]] [destination-port dport [end]]
[no] {permit | deny} tcp
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[source-port sport [end]] [destination-port dport [end]]
• protocol-number – A specific protocol number. (Range: 0-255)
• source – Source IP address.
• destination – Destination IP address.
• address-bitmask – Decimal number representing the address bits to
match.
• host – Keyword followed by a specific IP address.
• sport – Protocol
• dport – Protocol
• end – Upper bound of the protocol port range. (Range: 0-65535)

Default Setting

None
Command Mode
Extended ACL
Command Usage
• All new rules are appended to the end of the list.
• Address bitmasks are similar to a subnet mask, containing four
integers from 0 to 255, each separated by a period. The binary mask
uses 1 bits to indicate "match" and 0 bits to indicate "ignore." The
bitmask is bitwise ANDed with the specified source IP address, and
then compared with the address for each IP packet entering the port(s)
to which this ACL has been assigned.
1. Includes TCP, UDP or other protocol types.
A
CCESS
1
source port number. (Range: 0-65535)
destination port number. (Range: 0-65535)
1
C L
ONTROL IST
C
OMMANDS
4-117