SMC Networks 8606SX - annexe 2 User Manual page 61

Note: To open an existing
profile, select Open
Profile from the File
menu.
To open the profile window,
select New Profile from the
File menu and enter the
target parameters in the
dialog box.
Select the required variables
from the MIB Tree window
and press the Add to Profile
button.
4. Select the required variable from the MIB Tree window
by highlighting it with your mouse and then pressing the
Add to Profile button.
5. The Add to profile dialog box will open, allowing you to
verify the selected variable and destination profile. Press
OK to include the selected variable in your profile or
Cancel to abort the selection.
6. MIB name, object label, table index and value fields for the selected variable will be added to
the Profile window. Note that the table index will be 0 if the selected item is not a table
variable, and the initial value displayed is <null>.
7. Use the editing buttons provided in the Profile window
toolbar to insert or remove variables, or to display the
MIB definition for any variable.
8. Use the data request buttons to get or set the values for
the profile set as a group. To cancel a request, use the
delete button.
9. After defining the required profile list, use the save file button to
write the profile to disk, or the open file button to start a new
profile.
SNMP MIB M
ANAGEMENT
6-15