SMC Networks 8606SX - annexe 2 User Manual page 156

E M
RROR ESSAGES
Setup receive message error - error code = %d.
Cause: Cannot setup a Windows message for receive frames. The error code comes from the
WSASelect( ) function in the WinSocket specification.
Action: Check the network subsystem by error code.
The application of session number does not exist.
So, the program cannot close communication channel.
Cause: This is an internal error of the application program.
Action: Please contact SMC Technical Support for help.
The network subsystem is not ready!
Cause: The network subsystem may not be the correct platform.
Action: Check for errors in platform.
The protocol stack is saturated.
Cause: The ICMP module cannot process applications at a high layer than your setting.
Action: Modify ProtocolStack in the [icmp] section of the network configuration file network.ini.
The session number of application is duplicate.
Cause: Another client application has the same Windows handle registered to ICMP.DLL.
Action: May have a program error; restart Windows and retry.
The slot is saturated.
Cause: Too many client applications of ICMP.DLL are running.
Action: Close some client applications of ICMP.DLL and retry.
The windows socket's version specified by application is not supported by this
winsock.dll!
Cause: The version of winsock.dll did not match the requirements of ICMP.DLL.
Action: Change the TCP/IP stacks and winsock.dll.
The winsock.dll should at lease support version 1.1
Cause: The version of winsock.dll is too old.
Action: Upgrade the TCP/IP stacks platform.
Windows socket version %d.%d required, but not supported by winsock.dll.
Cause: The version of winsock.dll did not match the requirements of ICMP.DLL.
Action: Change the TCP/IP stacks and winsock.dll.
Winsock.dll not able to support the minimum number of sockets required by ICMP
module.
Cause: Too many WinSocket applications in use.
Action: Close some WinSocket applications and retry.
I-12