SMC Networks 8606SX - annexe 2 User Manual page 103

Field
Channel Controls the flow of data through the channel.
Index A number that identifies this channel in the channel table.
Interface A media interface on the monitored device. (MIB-2: 1.3.6.1.2.1.2.2.1.2)
Accept Type Controls how the filters associated with this channel are implemented.
Matched - Packets will be accepted if they match both packet data and packet status entries
defined in the filter.
Failed - Packets will be accepted if they fail either packet data or packet status entries
defined in the filter.
Turn-On Event Specifies an event that will turn on the channel.
Turn-Off Event Specifies an event that will turn off the channel.
Accept Event Specifies an event that will be generated when the channel is on and a packet is accepted.
Accept Event Status Controls the flow of events.
Ready - A single event will be generated, after which the status will be set by the RMON
probe to "Fired." While in the Fired state, no events will be generated until the status is reset
to Ready or Always Ready.
Always Ready – Disables flow control and allows events to generated at will. Using this
setting runs the risk of generating a high volume of traffic and affecting network performance.
Description A comment provided by the user describing this channel.
Buffer Configures the buffer used to store packets matched for this control entry.
Index A number that identifies this buffer in the buffer table.
Full Action Controls the action of the buffer when it reaches full status.
Lock - The buffer will be locked as soon as it fills.
Wrap - Old data will be overwritten when the buffer fills.
Capture Slice Size The maximum number of bytes for each packet that will be saved in this capture buffer.
Values include 100, 200, 500, 1000 bytes and Maximum. If set to Maximum, the capture
buffer will save as many bytes as possible.
Download Slice Size The maximum number of bytes for each packet that will be returned to the management
station in a single retrieve operation. Values include 100, 200 and 500 bytes.
Buffer Size Requested The number of bytes requested for this capture buffer. Values include 10000, 20000, 50000,
100000, 200000, 500000 bytes and Maximum. If set to Maximum, the capture buffer will
save as many bytes as possible.
Buffer Size Granted The number of bytes granted for this capture buffer.
Description
U RMON
SING
9-23