SMC Networks 8606SX - annexe 2 User Manual page 100

U RMON
SING
Field
Owner
Interface
Data Control
Accepted/Captured
Buffer Status
Channel Index
Buffer Control Index
Description
Buffer
Filter
On/Off
Refresh Time for
Control Table
Separate Tables
Configuring Filters
channel and then press the Filter button. If you define more than one filter, they will be OR'ed
together and compared against data crossing the specified interface. To configure filters, click on
the Add (Edit) button to add (edit) an entry. The dialog box that opens is described in the following
table.
9-20
The person who created this entry.
A media interface on the monitored device. (MIB-2: 1.3.6.1.2.1.2.2.1.2)
Indicates if the capture channel is enabled or not. The capture channel may be manually
enabled or disabled using the On/Off button. Or a Turn-On Event defined for this channel can
be used to enable it. Once enabled, the channel will start capturing packets that pass the filter.
Indicates the number of times this channel has accepted a packet, and the number of
packets currently in this capture buffer.
Indicates whether the buffer space is available or full (wrapped or locked).
A number that identifies the channel in the channel table.
A number that identifies this buffer in the bufferControl table.
A comment provided by the user describing this channel.
Displays the buffer for the selected control entry.
Displays the filter control table.
This button is used to manually enable or disable the capture channel.
The refresh interval for this control table.
Range: 5-600 seconds
Displays a tabbed window with the channel, filter and buffer tables.
- You can set up to 20 filters for each channel. Just highlight the concerned
Description