SMC Networks 8606SX - annexe 2 User Manual page 128

C E V
USTOMIZING LITE IEW
To edit specific traps:
1. Define trap message using the following format:
message=string
The string variable can be any character string with some components generated from the
information in the variable list. You can use variables in the form of %x, where x is any letter
from a to z.
2. Define variables generated from trap messages using the following format:
x=Object_name,Symbol
The following table describes each item:
Parameter
x=
Object_name
Symbol
3. Define the event to trigger using the following format:
event=Active_Flag,Event_Name
The following describes each item:
Parameter
event=
Active_Flag
Event_Name
Example: Sample of specific trap entry
[Ent1.1]
message=Temperature over 65 degrees
event=1,Trap
[Ent1.2]
message=Port auto-partitioned
event=1,Trap
[Ent1.3]
message=Port bad link
event=1,Trap
B-14
Variable name, any letter from a to z.
MIB object name defined in the MIB database.
A symbol used to identify the use of a value or index in the object name.
• The variable binding uses the format object.instance (where instance is the index of a table entry
if a table is being referred to); and is equal to "0" for single value variables.
• You can use the value of the variable, which is represented with "v" or one of the indices.
• The indices are represented as a list of numbers. Long indices like the IP address take four
numbers. The format for indices is in , where n is a positive number, e.g., i2.
Description
The event to trigger.
Select either 1 or 0; 1=Active, 0=Disabled.
Name of the event or trap to trigger.
Description