SMC Networks 8606SX - annexe 2 User Manual page 159

E M
RROR ESSAGES
Cannot open SNMP session.
Cause: There are too many sessions or a lower layer (SNMPAPI.DLL) crashed.
Action: Close other windows based on SNMPAPI.DLL, or reset the computer and restart Windows.
Cannot read file.
Cause: Cannot read a text file from disk.
Action: Verify that the correct file was specified, or recreate the file.
Cannot read the profile.
Cause: Cannot read a profile from disk.
Action: Verify the filename or recreate the profile.
Cannot write data to output file.
Cause: Disk full.
Action: Free up disk space and try again.
Index variable(%s) listed in the INDEX clause of %s not found in MIB database.
Cause: The index variable(s) listed in the entry variable cannot be found in the MIB database.
Action: Load MIB file which contains the index variable(s) into the MIB database
Invalid object type. It must be COUNTER, INTEGER, GAUGE or TIMETICKS.
Cause: Invalid object type.
Action: Object type must be COUNTER, INTEGER, GAUGE or TIMETICKS.
Line xxx: Bad Record.
Cause: A bad record found in line xxx.
Action: None. (The record will not display in the list box.)
Line xxx: Invalid value will be discarded.
Cause: An object in line xxx has an invalid value.
Action: None. (The invalid value will be discarded and given a default value.)
Line xxx: Object not found.
Cause: The object listed in line xxx of the profile not found in the MIB database.
Action: None. (The record will not be displayed in the list box.)
No SNMP Request.
Cause: Improper command sequence.
Action: Perform SNMP Get, Set or GetNext before action (pause, resume or delete).
Next object not under current subtree.
Cause: The SNMP GetNextRequest cannot display the next subtree in the current window.
Action: Create another subtree ("Tree/Subtree" menu) which contains the object and perform the
SNMP GetNextRequest again.
I-15