SMC Networks 8606SX - annexe 2 User Manual page 149

Cannot run BTPIFM.EXE. or Cannot run BTPIFM.EXE with error code %d.
Cause: Initial BOOTP.DLL error; may be out of memory.
Action: Close some applications and retry, or restart windows. The error code comes from the SDK
WinExec( ) API function.
Cleanup WinSocket failed with error code %d when exiting BTPIFM.EXE!
Cause: The Unregister operation from winsock.dll failed. The error code should refer to the
WSACleanup( ) function in the WinSocket specification.
Action: Check the network subsystem by error code.
Close socket failed with error code %d when exiting BTPIFM.EXE!
Cause: Attempt to close the socket BOOTP failed. This error code comes from the function
closesocket( ) in the WinSocket specification.
Action: Check the network subsystem by error code.
Enable receive broadcast frame error with error code %d.
Cause: ENABLE receive broadcast option error. Assigned error code comes from the function
setsockopt( ) in the WinSocket API.
Action: Check the network subsystem by error code.
Get bootp service info error.
Cause: The error code comes from the function getservbyname( ) of the WinSocket specification.
Action: Check the network subsystem by error code.
Got FD_READ message, but got length error with error code %d.
Cause: Received a packet, but the network subsystem cannot report the length. The error code
comes from the function ioctlsocket( ) of WinSocket API.
Action: Check the network subsystem by error code.
Memory allocation is not successful.
Cause: Out of memory.
Action: Close some applications and retry, or restart windows.
No Usable WinSock.dll found.
Cause: The Call WsaStartup failed with an unknown error code.
Action: Check the version of winsock.dll.
Open UDP Socket failed with error code = %d!
Cause: The Open Socket opeation fail. The error code comes from the function socket( ) of the
WinSocket API.
Action: Check the network subsystem by error code.
Send packet failed with error code %d.
Cause: The network subsystem is unable to send a packet. The error code comes from the
function sendto( ) in the WinSocket specification.
Action: Check the network subsystem by error code.
E M
RROR ESSAGES
I-5