SMC Networks 8606SX - annexe 2 User Manual page 119

Parameter Definitions for the [tools] Section
Parameter
Seq= The sequence number is from 1 to n, where n is the total number of items in the Tools Menu.
EV_Flag Difference between EliteView and Non-EliteView Windows applications. Acceptable values include:
0 Designates the entry as a "Non-EliteView Windows application"; i.e., it cannot work closely with
EliteView, but may be initiated from within some EliteView commands as an independent process.
1 Designates the entry as an "EliteView Application"; i.e., it follows the set of rules specified by SMC
to allow interaction with other EliteView modules.
Menu_Item This is the text that appears in the menu. An ampersand "&" before one of the letters in the text
designates a short-cut key sequence (i.e., a single-letter used with the Alt key), which you can press to
invoke the corresponding command. This is normally shown onscreen with an underline.
Executable The name of the Windows application that is invoked when the corresponding item is selected. This
application program is set as the default application, which means that it is invoked only if no other
definition for individual devices exists.
Help_Message The message that appears in the status bar when the specified menu item is browsed.
Toolbar_Bitmap The toolbar bitmap shown in the EliteView platform program.
The above list may be followed by zero or more lines for definitions that apply to individual
devices.
3. Identify particular tools for any device, if necessary. Do this by adding or editing the following
command line:
Device_ID.Seq=Executable
The following describes each item:
Parameter
Device_ID
Seq
Executable
If no application is designated for a device, then the default application listed in the preceding
table is invoked when the corresponding menu item is selected.
Example: Sample entry for [tools] section
[tools]
total=5
1=1,&Zoom,SNMPTREE.EXE,Zoomin the object,zoom
2=1,&Alive Test,ALTEST.EXE,Alive test,altest
3=1,&MIB Browser,SNMPTREE.EXE,MIB browser,tree
4=1,M&IB-2 Viewer,MIB2VIEW.EXE,MIB-2(RFC1213) Viewer, mib2view
5=1,&Telnet,TELNET.EXE,Telnet,telnet
The device identifier defined in the [device] section.
The menu item sequence number the device will override.
Filename of the EliteView application that is invoked when the device type and menu items
are selected.
Description
Description
C E V
USTOMIZING LITE IEW
B-5