SMC Networks 8606SX - annexe 2 User Manual page 104

U RMON
SING
Viewing Separate Tables
buffers using the tabbed window shown below. The information provided is described in the
following tables.
Field
Channels
Index
Owner
Interface Index
Accept Type
Data Control
Turn-On Event
Turn-Off Event
Event Index
Event Status
Matches
Description
Status
Field
Filters
Index
Owner
Channel Index
Packet Data Offset
Packet Data
Packet Data Mask
Packet Data Not Mask The inversion mask that is applied to the match process.
Packet Status
Packet Status Mask
Packet Status
Not Mask
Status
9-24
- You can quickly display the configuration for channels, filters and
Controls the flow of data and events through the channel.
A number that identifies this channel in the channel table.
The person who created this channel entry.
A media interface on the monitored device. (MIB-2: 1.3.6.1.2.1.2.2.1.2)
Controls how the filters associated with this channel are implemented.
Matched – Packets will be accepted if they match both packet data and packet status
entries defined in the filter.
Failed – Packets will be accepted if they fail either packet data or packet status entries
defined in the filter.
Controls the flow of data through the channel.
On - Data, Status and Events flow through the channel.
Off - Nothing flows through the channel.
Specifies an event that will turn on the channel.
Specifies an event that will turn off the channel.
Specifies an event to be generated when the channel is on and a packet is accepted.
Controls the flow of events.
Ready - A single event will be generated, after which the status will be set by the RMON
probe to "Fired." While in the Fired state, no events will be generated until the status is reset
to Ready or Always Ready.
Always Ready – Disables flow control and allows events to generated at will. Using this
setting runs the risk of generating a high volume of traffic and affecting network performance.
The number of times this channel has accepted a packet.
A comment provided by the user describing this channel.
The current status of the index entry in the Control Table: Valid, Under Creation or Invalid
Specifies the filter expressions used to capture data from the interface.
An index that uniquely identifies an entry in the filter table.
The person who created this filter entry.
The index used to identify the channel entry associated with this filter.
The offset from the beginning of each packet where a match of packet data will be attempted.
The data that are to be matched with the input packet.
The mask that is applied to the match process.
The status that is to be matched with the input packet.
The mask that is applied to the status match process.
The inversion mask that is applied to the status match process.
The current status of the index entry in the Control Table: Valid, Under Creation or Invalid
Description
Description