SMC Networks 8606SX - annexe 2 User Manual page 42

N T
ETWORK OOLS
To delete a node:
1. Select a node entry by clicking on its address entry.
2. Click on the Del Node button.
The node entry and all associated file mappings are removed.
Adding Filename Mappings
The file mapping list shows every node defined.
To add a filename mapping:
1. Click on an entry in the node address list.
2. Click the Add... button in the File Mappings field to insert a new file map entry.
- The Add File Mapping dialog box will appear.
3. Input the generic name and filename, including the path.
4. Click OK to store the new mapping.
- The new entry will appear in the file mappings list.
To view the note and file mapping(s) for a node, click on the
required entry in the address list.
To change filename mappings:
1. Select the file mapping.
2. Click on the Edit button.
3. Change information in the Edit File Mapping dialog box.
4. Click OK to accept changes.
To delete a file mapping:
1. Select the file mapping.
2. Click on Del.
The filename mapping will be removed.
Default Information
EliteView's BOOTP Server provides flexible filename mapping. However, you may find it most
convenient to establish a common default for most nodes on the network.
To define a default address with IP and physical addresses,
1. Select the "default" address (0.0.0.0).
2. Define file mappings applicable to all nodes on the network.
Every BOOTP request to lookup a filename will be checked in this priority:
1. Consult the specific node address.
2. If no address is found for the specified node, consult the default file mappings.
5-4