SMC Networks 8606SX - annexe 2 User Manual page 50

SNMP MIB M
ANAGEMENT
If an object identifier is not defined, the following message may appear on the screen:
If an unknown object identifier is found in the definition for OBJECT-TYPE, it will be reported
after all MIB objects are checked as in the following error message. In the example given below,
you should check the last line of the OBJECT-TYPE macro section.
To unload MIB modules,
You can unload an MIB module when it is no longer needed, or when you wish to update or
replace it. Highlight the MIB you want to unload, list currently loaded modules, and then select
Unload. If other MIB modules link to the module you wish to unload, EliteView will ask you to
unload these modules first before you can successfully unload the required module.
To view the MIB Module List
Use the scroll bar next to the MIB Module List on the MIB Compiler. This list shows the modules
currently loaded in the MIB compiler.
Things to remember when using the MIB Compiler:
• The system always loads the current MIB database.
• To replace an MIB with its new version, first unload the older version and then load the new
version.
• If an error occurs during the loading or unloading process, the MIB Compiler automatically skips
the erroneous command and moves on to the next one.
6-4