Table of Contents
Advertisement
To configure the Trap Manager to receive traps from any third-party SNMP device, you
should find answers to the following questions from the vendor of your third-party device:
1. What is the enterprise of the device?
2. How many enterprise (private) traps does the device have?
3. What does each private trap mean?
4. What are the corresponding MIB variables used by each
Finally, use the answers you get for the above questions to edit the corresponding sections in the
TRAP.INI file.
Exporting Logged Data to Other Software
All databases created by EliteView are in dBASE format. Thus any software supporting dBASE files
can read EliteView data.
To export logged data into other software,
1. Bring up the Log Data Manager.
2. Highlight the logged data you wish to copy to another application. Do this by holding down the
left button on the mouse and dragging the mouse over the required lines.
3. Select Copy from the Edit Menu of the Log Data Manager. This will copy the selected data into
the Windows clipboard.
4. Open the application that you want to use. For example, load Microsoft Word if you want to
copy the
information to it.
5. Paste the information from the clipboard onto the Microsoft Word file. And then save it if
necessary.
T
E
V
YPICAL
LITE
IEW
private trap?
A
PPLICATIONS
A-7
Advertisement
Table of Contents
