SMC Networks 2555W-AG2 User Manual page 73

protocol command to define the protocols that you want to filter. To remove an entry
from the table, use the address filter delete command. To display the current
settings, use the show filters command from the Exec mode.
Enterprise AP(config)#filter local-bridge
Enterprise AP(config)#filter ap-manage
Enterprise AP(config)#filter uplink enable
Enterprise AP(config)#filter uplink add 00-12-34-56-78-9a
Enterprise AP(config)#filter ethernet-type enable
Enterprise AP(config)#filter ethernet-type protocol ARP
Enterprise AP(config)#exit
Enterprise AP#show filters
Protocol Filter Information
=========================================================
Local Bridge
AP Management
Ethernet Type Filter :ENABLED
Enabled Protocol Filters
---------------------------------------------------------
Protocol: ARP
=========================================================
Enterprise AP#
:ENABLED
:ENABLED
Advanced Configuration
ISO: 0x0806
6
7-73
7-73
7-74
7-74
7-74
7-75
7-76
6-19