SMC Networks 2555W-AG2 User Manual page 142

6
System Configuration
• Bootrom Version: Show the bootrom version number.
• Hardware Version: Shows the hardware version number.
AP Wireless Configuration – The AP Wireless Configuration tables display the radio
and VAP interface settings listed below. Note that Interface Wireless A refers to the
802.11a radio and Interface Wireless G refers the 802.11b/g radio.
• SSID: The service set identifier for the VAP interface.
• Radio Channel: The radio channel through which the access point communicates
with wireless clients.
• Encryption: The key size used for data encryption.
• Authentication Type: Shows the type of authentication used.
• 802.1X: Shows if IEEE 802.1X access control for wireless clients is enabled.
CLI Commands for Displaying System Settings – To view the current access point
system settings, use the show system command from the Exec mode. To view the
current radio interface settings, use the show interface wireless a or show
interface wireless g command (see page 7-109).
Enterprise AP#show system
System Information
==========================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Management VLAN ID(AP): 1
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
Boot Rom Version
Software Version
SSH Server
SSH Server Port
Telnet Server
DHCP Relay
==========================================================
Enterprise AP#
6-88
: A123456789
: 0 days, 4 hours, 33 minutes, 29 seconds
: SMC
:
:
: US - UNITED STATES
: 00-30-F1-F0-9A-9C
: 192.168.1.1
: 255.255.255.0
: 0.0.0.0
: DISABLED
: ENABLED
: ENABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: v3.0.7
: v3.0.0.1
: ENABLED
: 22
: ENABLED
: DISABLED
7-22