SMC Networks 2555W-AG2 User Manual page 118

6
System Configuration
CLI Commands for WMM – Enter interface wireless mode and type wmm required
for clients that want to associate with the access point. The
wmm-acknowledge-policy command is used to enable or disable a policy for each
access category. The wmmparms command defines detailed WMM parameters.
Enterprise AP(if-wireless a)#wmm required
7-134
Enterprise AP(if-wireless a)#wmm-acknowledge-policy 0 noack
7-134
Enterprise AP(if-wireless a)#wmmparams ap 0 4 6 3 1 1
7-135
6-64