SMC Networks 2555W-AG2 User Manual page 58

6
System Configuration
CLI Commands for System Identification – Enter the global configuration mode, and
use the system name command to specify a new system name. Then return to the
Exec mode, and use the show system command to display the changes to the
system identification settings.
Enterprise AP#config
Enterprise AP(config)#system name R&D
Enterprise AP(config)#end
Enterprise AP#show system
Enterprise AP#config
Enter configuration commands, one per line.
Enterprise AP(config)#system name R&D
Enterprise AP(config)#end
Enterprise AP#show system
System Information
==============================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
MAC Address
Radio A MAC Address
Radio G MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Management VLAN ID(AP): 1
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
Boot Rom Version
Software Version
SSH Server
SSH Server Port
Telnet Server
DHCP Relay
==============================================================
Enterprise AP#
6-4
:
: 0 days, 0 hours, 32 minutes, 22 seconds
: R&D
:
: Contact
: US - UNITED STATES
: 00-12-CF-12-34-60
: 00-12-CF-12-34-61
: 00-12-CF-12-34-65
: 192.168.1.1
: 255.255.255.0
: 0.0.0.0
: DISABLED
: ENABLED
: ENABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: v1.1.5
: v4.3.2.0b01
: ENABLED
: 22
: ENABLED
: DISABLED
7-14
7-87
7-22
7-8
7-14
7-87
7-22