Table of Contents
Advertisement
6
System Configuration
----------------Antenna-------------------------------------------------
Antenna Control method
Antenna ID
Antenna Location
----------------Quality of Service---------------------------------------
WMM Mode
WMM Acknowledge Policy
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
WMM BSS Parameters
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
WMM AP Parameters
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
========================================================================
Enterprise AP#
CLI Commands for WEP over 802.1X Security – Use the vap command to access
each VAP interface to configure the security settings. First set 802.1X to required
using the 802.1x command and set the 802.1X key refresh rates. Then, use the
auth command to select open system authentication and the encryption command
6-78
: Diversity
: 0x0000(Default Antenna)
: Indoor
: SUPPORTED
: Acknowledge
: Acknowledge
: Acknowledge
: Acknowledge
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
3
logCwMax:
Admission Control: No
TXOP Limit: 3.008 ms
: logCwMin:
2
logCwMax:
Admission Control: No
TXOP Limit: 1.504 ms
: logCwMin:
4
logCwMax:
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
3
logCwMax:
Admission Control: No
TXOP Limit: 3.008 ms
: logCwMin:
2
logCwMax:
Admission Control: No
TXOP Limit: 1.504 ms
AIFSN:
3
AIFSN:
7
4
AIFSN:
2
3
AIFSN:
2
6
AIFSN:
3
AIFSN:
7
4
AIFSN:
1
3
AIFSN:
1
Advertisement
Table of Contents
