Show Snmp - SMC Networks 2555W-AG2 User Manual

show snmp

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Enterprise AP#show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId :80:00:07:e5:80:00:00:2e:62:00:00:00:18
EngineBoots:1
Trap Destinations:
1: 192.168.1.9, Community: *****, State: Enabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
dot11InterfaceAGFail
dot11StationAssociation
Enabled
dot11StationReAssociation
Enabled
dot1xAuthFail
dot1xAuthSuccess
dot1xMacAddrAuthSuccess
Enabled
iappStationRoamedFrom
Enabled
localMacAddrAuthFail
pppLogonFail
configFileVersionChanged
Enabled
systemDown Enabled
=============================================
Enterprise AP#
: Enable
: *****
: *****
: WC-19
: Paul
Enabled
Enabled dot11StationAuthentication
Enabled
Enabled dot1xAuthNotInitiated
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
dot11InterfaceBFail
dot11StationRequestFail
dot1xMacAddrAuthFail
iappContextDataSent
iappStationRoamedTo
localMacAddrAuthSuccess
sntpServerFail
radiusServerChanged
systemUp Enabled
SNMP Commands
Enabled
Enabled
Enabled
Enabled
Enabled
7
7-53