Table of Contents
Advertisement
Command Usage
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by the
access point. However, it may be used by the syslog server to sort messages
or to store messages in the corresponding database.
Example
Enterprise AP(config)#logging facility 19
Enterprise AP(config)#
logging clear
This command clears all log messages stored in the access point's memory.
Syntax
logging clear
Command Mode
Global Configuration
Example
Enterprise AP(config)#logging clear
Enterprise AP(config)#
show logging
This command displays the logging configuration.
Syntax
show logging
Command Mode
Exec
Example
Enterprise AP#show logging
Logging Information
============================================
Syslog State
Logging Console State
Logging Level
Logging Facility Type
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
Enterprise AP#
: Enabled
: Enabled
: Alert
: 16
System Logging Commands
7
7-31
Advertisement
Table of Contents
