Rogue Ap Detection Commands; Rogue-Ap Enable - SMC Networks 2555W-AG2 User Manual

7
Command Line Interface

Rogue AP Detection Commands

A "rogue AP" is either an access point that is not authorized to participate in the
wireless network, or an access point that does not have the correct security
configuration. Rogue APs can potentially allow unauthorized users access to the
network. Alternatively, client stations may mistakenly associate to a rogue AP and
be prevented from accessing network resources. Rogue APs may also cause radio
interference and degrade the wireless LAN performance.
The access point can be configured to periodically scan all radio channels and find
other access points within range. A database of nearby access points is maintained
where any rogue APs can be identified.
Command

rogue-ap enable

rogue-ap authenticate
rogue-ap duration
rogue-ap interval
rogue-ap scan
show rogue-ap
rogue-ap enable
This command enables the periodic detection of nearby access points. Use the no
form to disable periodic detection.
Syntax
[no] rogue-ap enable
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
• While the access point scans a channel for rogue APs, wireless clients will
not be able to connect to the access point. Therefore, avoid frequent
scanning or scans of a long duration unless there is a reason to believe that
more intensive scanning is required to find a rogue AP.
7-112
Table 7-18. Rogue AP Detection Commands
Function
Enables the periodic detection of other nearby access
points
Enables identification of all access points
Sets the duration that all channels are scanned
Sets the time between each scan
Forces an immediate scan of all radio channels
Shows the current database of detected access points Exec
Mode Page
GC 7-112
GC 7-113
GC 7-114
GC 7-114
GC 7-115
7-116