Table of Contents
Advertisement
6
System Configuration
----------------Quality of Service---------------------------
WMM Mode
WMM Acknowledge Policy
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
WMM BSS Parameters
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
WMM AP Parameters
AC0(Best Effort)
AC1(Background)
AC2(Video)
AC3(Voice)
=============================================================
Enterprise AP#
Radio Settings G (802.11g)
The IEEE 802.11g standard operates within the 2.4 GHz band at up to 54 Mbps.
Also note that because the IEEE 802.11g standard is an extension of the IEEE
802.11b standard, it allows clients with 802.11b wireless network cards to associate
to an 802.11g access point.
First configure the radio settings that apply to the individual VAPs (Virtual Access
Point) and the common radio settings that apply to all of the 802.11g interfaces. After
you have configured the radio settings, go to the Security page under the 802.g
Interface (see "Security" on page 6-69), enable the radio service for any of the VAP
interfaces, and then set an SSID to identify the wireless network service provided by
each VAP. Remember that only clients with the same SSID can associate with a
VAP.
Note: You must first enable VAP interface 0 before the other interfaces can be enabled.
6-66
: SUPPORTED
: Ack
: Acknowledge
: Acknowledge
: Acknowledge
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
3
logCwMax:
Admission Control: No
TXOP Limit: 3.008 ms
: logCwMin:
2
logCwMax:
Admission Control: No
TXOP Limit: 1.504 ms
: logCwMin:
4
logCwMax:
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
4
logCwMax: 10
Admission Control: No
TXOP Limit: 0.000 ms
: logCwMin:
3
logCwMax:
Admission Control: No
TXOP Limit: 3.008 ms
: logCwMin:
2
logCwMax:
Admission Control: No
TXOP Limit: 1.504 ms
AIFSN:
3
AIFSN:
7
4
AIFSN:
2
3
AIFSN:
2
6
AIFSN:
3
AIFSN:
7
4
AIFSN:
1
3
AIFSN:
1
Advertisement
Table of Contents
