Configuring A Server Behind Nat; Figure 157 Menu 15.2 Nat Server Setup; Table 94 Menu 15.1.1.1 Editing/Configuring An Individual Rule In A Set - ZyXEL Communications Prestige 660H Series User Manual
802.11g wireless adsl2+ 4-port security gateway
Hide thumbs
Also See for Prestige 660H Series:
- User manual (460 pages) ,
- Manual (29 pages) ,
- Guía de inicio rápido (10 pages)
Table of Contents
Advertisement
The following table explains the fields in this menu.
Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set
Table 94
FIELD
Type
Local IP
Start
End
Global IP
Start
End
Server
Mapping Set
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:
29.4 Configuring a Server behind NAT
Follow these steps to configure a server behind NAT:
1 Enter 15 in the main menu to go to Menu 15 - NAT Setup.
2 Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.
Figure 157 Menu 15.2 NAT Server Setup
3 Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.
Chapter 29 Network Address Translation (NAT)
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are
the mapping types discussed in
multiple servers of different types behind NAT to this computer. See
page 275
for an example.
Only local IP fields are N/A for server; Global IP fields MUST be set for Server.
This is the starting local IP address (ILA).
This is the ending local IP address (ILA). If the rule is for all local IPs, then put the Start
IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and
Server types.
This is the starting inside global IP address (IGA). If you have a dynamic IP, enter
0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if
the types are Many-to-One or Server.
This is the ending inside global IP address (IGA). This field is N/A for One-to-One,
Many-to-One and Server types.
Only available when Type is set to Server. Type a number from 1 to 10 to choose a
server set from menu 15.2.
" to save your configuration, or press [ESC] at any time to cancel.
Menu 15.2 - NAT Server Sets
1. Server Set 1 (Used for SUA Only)
2. Server Set 2
3. Server Set 3
4. Server Set 4
5. Server Set 5
6. Server Set 6
7. Server Set 7
8. Server Set 8
9. Server Set 9
10. Server Set 10
Enter Set Number to Edit:
Prestige 660H/HW Series User's Guide
Chapter 9 on page
114. Server allows you to specify
Press ENTER to Confirm
Section 29.5.3 on
272
Advertisement
Table of Contents
Troubleshooting
