Add/Edit Ipsec Setting - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 13 IPSec
Table 54 Security Settings > IPSec > Settings (continued)
LABEL
Status
Connection
Name
Remote
Gateway
Local
Addresses
Remote
Addresses
Modify

13.2.1 Add/Edit IPSec Setting

Click Add New Connection or a policy's Edit icon in the IPSec > Settings
screen to edit VPN policies.
Note: The ZyXEL Device uses the system default gateway interface's WAN IP
address as its WAN IP address to set up a VPN tunnel.
13.2.1.1 Auto(IKE) Key Setup
Auto(IKE) provides more protection so it is generally recommended. You only
configure VPN manual key when you select Auto(IKE) in the Key Exchange
Method field on the IPSec > Setting: Add/Edit screen. The following is the
IPSec Setting - Auto(IKE) screen.
180
DESCRIPTION
This field displays whether the VPN policy is active or not. A yellow bulb
signifies that this VPN policy is active. A gray bulb signifies that this VPN
policy is not active.
This field displays the identification name for this VPN policy.
This is the static WAN IP address or URL of the remote IPSec router.
This is the IP address of computer(s) on your local network behind your
ZyXEL Device.
This is the IP address of computer(s) on the remote network behind the
remote IPSec router.
Click the Edit icon to edit the VPN configuration.
Click the Delete icon to remove an existing VPN configuration.
P-660HN-51 User's Guide