Add/Edit Ipsec Setting - ZyXEL Communications VSG1435-B101 - V1.10 Manual

Table 86 Security Settings > IPSec > Settings
LABEL
Local
Addresses
Remote
Addresses
Modify

21.3.1 Add/Edit IPSec Setting

Click Add New Connection or a policy's Edit icon in the IPSec > Settings
screen to edit VPN policies.
Note: The ZyXEL Device uses the system default gateway interface's WAN IP
address as its WAN IP address to set up a VPN tunnel.
21.3.1.1 Auto(IKE) Key Setup
Auto(IKE) provides more protection so it is generally recommended. You only
configure VPN manual key when you select Auto(IKE) in the Key Exchange
VSG1435-B101 Series User's Guide
DESCRIPTION
This is the IP address of computer(s) on your local network behind your
ZyXEL Device.
This is the IP address of computer(s) on the remote network behind the
remote IPSec router.
Click the Edit icon to edit the VPN configuration.
Click the Delete icon to remove an existing VPN configuration.
Chapter 21 IPSec
253