The Wps Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 6 Wireless

6.5 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See
page 107
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
Section 6.2 on page
have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
Click Network Settings > Wireless > WPS. The following screen displays.
Select Enable and click Apply to activate the WPS function. Then you can
configure the WPS settings in this screen.
Figure 24 Network Settings > Wireless > WPS
The following table describes the labels in this screen.
Table 16 Network Settings > Wireless > WPS
LABEL
Enable WPS
Method 1
90
for more information about WPS.
78). If you want to use the WPS feature, make sure you
DESCRIPTION
Select Enable to activate WPS on the ZyXEL Device.
Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).
Section 6.9.8.3 on
P-660HN-51 User's Guide