Using Wps - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 4 Tutorials
the notebook's wireless client to search for the ZyXEL Device (see
page 51).

4.3.2 Using WPS

This section shows you how to set up a wireless network using WPS. It uses the
ZyXEL Device as the AP and ZyXEL NWD210N as the wireless client which
connects to the notebook.
f your wireless devices display the WPS logo, you can use Wi-Fi
Protected Setup (WPS) to add wireless devices to your wireless
network.
The ZyXEL Device's WPS function must be enabled before using WPS. Log into
ZyXEL Device's web configurator and go to the Network Settings > Wireless >
WPS screen. Enable the WPS function and click Apply.
There are three WPS methods to set up the wireless client settings:
• Method 1- Push Button Configuration (PBC) - simply press a button. This is
the easier of the two methods.
• Method 2- Register Wireless Client's PIN Number - Both the ZyXEL Device
and the wireless client has a Personal Identification Number (PIN). Enter the
wireless client's PIN number and register it on the ZyXEL Device to download
the wireless network settings from the ZyXEL Device.
• Method 3- Enter AP's PIN Number in Wireless Client - Configure a PIN
number on the ZyXEL Device. Enter the ZyXEL Device's PIN number and register
it on the wireless client.
46
Section 4.3.3 on
P-660HN-51 User's Guide