The Wmm Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

Table 16 Network Settings > Wireless > WPS (continued)
LABEL
Connect
Method 2
Register
Method 3
Release
Configuration
Generate
New PIN
Number
Apply
Cancel

6.6 The WMM Screen

Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in
wireless networks for multimedia applications.
P-660HN-51 User's Guide
DESCRIPTION
Click this button to add another WPS-enabled wireless device (within
wireless range of the ZyXEL Device) to your wireless network. This
button may either be a physical button on the outside of device, or a
menu button similar to the Connect button on this screen.
Note: You must press the other wireless device's WPS button
within two minutes of pressing this button.
Use this section to set up a WPS wireless network by entering the PIN
of the client into the ZyXEL Device.
Enter the PIN of the device that you are setting up a WPS connection
with and click Register to authenticate and add the wireless device to
your wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two
minutes to have it present its PIN to the ZyXEL Device.
Use this section to set up a WPS wireless network by entering the PIN
of the ZyXEL Device into the client.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
The PIN (Personal Identification Number) of the ZyXEL Device is shown
here. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the ZyXEL
Device create a new PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Chapter 6 Wireless
91