Add/Edit Ipsec Setting - ZyXEL Communications P-660HN-51 User Manual

Figure 76 IPSec Summary Fields
Local Network
Local IP Address
Local and remote IP addresses must be static.
Click Security Settings > IPSec to open the Settings screen. This is a menu of your IPSec tunnels.
Figure 77 Security Settings > IPSec > Settings
The following table describes the fields in this screen.
Table 54 Security Settings > IPSec > Settings
LABEL
Add New
Connection
#
Status
Connection
Name
Remote
Gateway
Local Addresses
Remote
Addresses
Modify

13.2.1 Add/Edit IPSec Setting

Click Add New Connection or a policy's Edit icon in the IPSec > Settings screen to edit VPN policies.
Chapter 13 IPSec
My IP Address
DESCRIPTION
Click this to configure a new VPN policy.
This is the index number of the entry.
This field displays whether the VPN policy is active or not. A yellow bulb signifies that this
VPN policy is active. A gray bulb signifies that this VPN policy is not active.
This field displays the identification name for this VPN policy.
This is the static WAN IP address or URL of the remote IPSec router.
This is the IP address of computer(s) on your local network behind your Zyxel Device.
This is the IP address of computer(s) on the remote network behind the remote IPSec
router.
Click the Edit icon to edit the VPN configuration.
Click the Delete icon to remove an existing VPN configuration.
P-660HN-51 User's Guide
Remote
IPSec Router
Secure Gateway IP Address
149
Remote Network
Remote IP Address