Add/Edit Port Forwarding - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 8 Network Address Translation (NAT)
The following table describes the fields in this screen.
Table 27 Network Settings > NAT > Port Forwarding
LABEL
Add new rule
#
Status
Service Name
WAN Interface
External Start
Port
External End
Port
Internal Start
Port
Internal End
Port
Server IP
Address
Modify

8.2.1 Add/Edit Port Forwarding

Click Add new rule in the Port Forwarding screen or click the Edit icon next to
an existing rule to open the following screen.
Figure 44 Port Forwarding: Add/Edit
136
DESCRIPTION
Click this to add a new rule.
This is the index number of the entry.
This field displays whether the NAT rule is active or not. A yellow bulb
signifies that this rule is active. A gray bulb signifies that this rule is not
active.
This shows the service's name.
This shows the WAN interface through which the service is forwarded.
This is the first external port number that identifies a service.
This is the last external port number that identifies a service.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
P-660HN-51 User's Guide