The More Ap Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 6 Wireless
Table 12 Wireless > General: More Secure: WPA(2) (continued)
LABEL
Encryption
WPA2 Pre-
Authentication
Network Re-auth
Interval
Group Key
Update Timer

6.3 The More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs)
on the ZyXEL Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 21 Network Settings > Wireless > More AP
The following table describes the labels in this screen.
Table 13 Network Settings > Wireless > More AP
LABEL
#
Status
86
DESCRIPTION
Select the encryption type (TKIP, AES or TKIP+AES) for data
encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or
AES.
This field is available only when you select WPA2.
Pre-authentication enables fast roaming by allowing the wireless client
(already connecting to an AP) to perform IEEE 802.1x authentication
with another AP before connecting to it. Select Enabled to turn on
preauthentication in WAP2. Otherwise, select Disabled.
Specify how often wireless stations have to resend usernames and
passwords in order to stay connected.
If wireless station authentication is done using a RADIUS server,
the reauthentication timer on the RADIUS server has priority.
The Group Key Update Timer is the rate at which the RADIUS server
sends a new group key out to all clients.
DESCRIPTION
This is the index number of the entry.
This field indicates whether this SSID is active. A yellow bulb signifies
that this SSID is active. A gray bulb signifies that this SSID is not active.
P-660HN-51 User's Guide