Create Certificate Request - ZyXEL Communications P-660HN-51 - V1.10 Manual

12.3.1 Create Certificate Request

Click Security Settings > Certificates > Local Certificates and then Create
Certificate Request to open the following screen. Use this screen to have the
ZyXEL Device generate a certification request.
Figure 65 Create Certificate Request
The following table describes the labels in this screen.
Table 46 Create Certificate Request
LABEL
Certificate Name
Common Name
Organization Name Type up to 63 characters to identify the company or group to which
State/Province
Name
Country/Region
Name
Apply
Back
After you click Apply, the Certificate Request Details screen displays. Click
Back to return to the Local Certificates screen. See
for field information.
P-660HN-51 User's Guide
DESCRIPTION
Type up to 63 ASCII characters (not including spaces) to identify this
certificate.
Type the IP address (in dotted decimal notation), domain name or e-
mail address in the field provided. The domain name or e-mail
address can be up to 63 ASCII characters. The domain name or e-
mail address is for identification purposes only and can be any
string.
the certificate owner belongs. You may use any character, including
spaces, but the ZyXEL Device drops trailing spaces.
Type up to 32 characters to identify the state or province where the
certificate owner is located. You may use any character, including
spaces, but the ZyXEL Device drops trailing spaces.
Select a country to identify the nation where the certificate owner is
located.
Click Apply to save your changes.
Click Back to return to the previous screen.
Chapter 12 Certificates
Section 12.3.3 on page 170
167