The Access Control Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

The following table describes the labels in this screen.
Table 41 Protocol: Add
LABEL
Add Protocol
Protocol
Source/
Destination
Port
Protocol
Number
Add
Rule List
Service
Name
Service
Description
Apply
Cancel

10.4 The Access Control Screen

Click Security Settings > Access Control to display the following screen. This
screen displays a list of the configured incoming or outgoing filtering rules.
Figure 61 Security Settings > Access Control
P-660HN-51 User's Guide
DESCRIPTION
Choose the IP port (TCP, UDP, ICMP, or Other) that defines your
customized port from the drop-down list box.
Select Other to apply the rule to any protocol.
These fields are displayed if you select TCP or UDP as the IP port.
Select Single to specify one port only or Range to specify a span of ports
that define your customized service. If you select Any, the service is
applied to all ports.
Type a single port number or the range of port numbers that define your
customized service.
This field is displayed if you select Other as the IP port.
Enter the number of your customized port.
Click this to add the protocol to the Rule List below.
Enter a unique name (up to 32 printable English keyboard characters,
including spaces) for your customized port.
Enter a description for your customized port.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 10 Firewall
157