Add/Edit An Acl Rule - ZyXEL Communications P-660HN-51 - V1.10 Manual

10.4.1 Add/Edit an ACL Rule

Click Add New ACL Rule or the Edit icon next to an existing ACL rule in the
Access Control screen. The following screen displays.
Figure 62 Access Control: Add/Edit
The following table describes the labels in this screen.
Table 43 Access Control: Add/Edit
LABEL
General
Filter Name
Select Source
Device
Source IP
Address
Select
Destination
Device
Destination IP
Address
P-660HN-51 User's Guide
DESCRIPTION
Enter a descriptive name of up to 16 alphanumeric characters, not
including spaces, underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-
only if you are editing the ACL rule.
Select the source device to which the ACL rule applies. If you select
Specific IP Address, enter the source IP address in the field below.
Enter the source IP address.
Select the destination device to which the ACL rule applies. If you
select Specific IP Address, enter the destiniation IP address in the
field below.
Enter the destination IP address.
Chapter 10 Firewall
159