Connection Samples; Connection Samples Using The Tascam Da Series; Track Recording System (Tascam Da-88 X 6) - Roland V-Mixer VM-C7100 Quick Start Manual

Connection Samples

Here are some examples that might be helpful when connecting your equipments.

Connection Samples Using the TASCAM DA Series

48 Track Recording System (TASCAM DA-88 x 6)

SYNC SYNC SYNC
IN OUT IN
DA-88
TDIF-1
SYNC
TDIF-1
DIF-AT
R-BUS(RMDBII)
MULTI 1-8
I/O Expansion Board
VM-24E
ANALOG
20 INPUTS
+
DIGITAL
Processor
2 INPUTS
VM-7200
VM-LINK
Console
ANALOG
2 INPUTS
VM-C7100/C7200
MIDI
OUT
MIDI
IN
Level Meter Bridge MB-24
• This is a 48 Track Recording System with six TASCAM DA Series recorders in use.
• You can record to individual tracks on 42 analog channels + 4 digital channels at once.
• You can mix 42 analog channels + 4 digital channels + 48 tape channels at once.
• You can control the recorder's Transport and the tracks' REC switch on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the "LEVEL METER".
• Turn the power on in the [DA Series]–[VM Series] order.
• 50 Scenes can be stored per Project (because of cascade connection).
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the "LEVEL METER".
• Connect the SYNC cable to DIF-AT connected MULTI 1-8 on the Master processor.
• The VM-7000 Series cannot be used as the Word Clock Master.
88
SYNC SYNC SYNC
OUT IN OUT
DA-88 DA-88
TDIF-1 TDIF-1
TDIF-1 TDIF-1
DIF-AT DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 9-16
MULTI 17-24
Cascade Kit
VM-24C
(MASTER)
MIDI
OUT
MIDI
IN
SEQUENCER/PC
SYNC SYNC SYNC
IN OUT IN
DA-88 DA-88
TDIF-1 TDIF-1
TDIF-1 TDIF-1
DIF-AT DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 1-8 MULTI 9-16
I/O Expansion Board
VM-24E
Processor
Cascade Kit
VM-24C VM-7200
(SLAVE)
SYNC SYNC
OUT IN
DA-88
TDIF-1
TDIF-1
DIF-AT
R-BUS(RMDBII)
MULTI 17-24
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS