Editing Samples (Sample Edit); Selecting A Sample Patch; Types Of Sample Patch - Roland MC-808 Owner's Manual

Editing samples (Sample Edit)

On the MC-808, waveforms (samples) that you've sampled, loaded, or imported can be easily selected and edited in the same way as
patches or rhythm sets.
The sample settings you edit will be lost when you turn off the power. If you want to keep your edits, you must save them (p. 101).

Selecting a sample patch

Types of sample patch

Waveforms (samples) that you've sampled, loaded, or imported can
be selected and edited as "sample patches" in the same way as
conventional patches or rhythm sets.
USAM: 0001–2000 These are samples in user memory.
A maximum of 2,000 samples can be saved.
CSAM: 0001–7000 These are samples in a CompactFlash card.
A maximum of 7,000 samples can be saved.
Selecting a sample patch
Selecting a patch used in a pattern
1.
In Pattern mode, select a pattern.
2.
Select the part that uses the sample patch you want to edit.
The currently selected sample patch is displayed.
fig.04-026.e
Name of the pattern
Part number
Sample patch name
3.
Press [PATCH/SAMPLE] to enter Patch/Sample mode.
fig.04-025.e
Part number
Sample patch name
4.
Use [CURSOR ] to move the cursor to the sample
patch number, and use the VALUE dial or [INC] [DEC] to
select the desired sample patch.
96
Sample patch number
Selecting a patch in Patch/Sample mode
1.
Press [PATCH/SAMPLE] to enter Patch/Sample mode.
The currently selected patch/rhythm set (the current patch/
current rhythm set) is shown.
fig.04-025.e
Part number
Sample patch name
2.
Use [CURSOR ] to move the cursor to the sample
patch number, and turn the VALUE dial or use [INC] [DEC]
to select the desired patch group.
USAM: User samples
CSAM: Card samples
* You can also use the GROUP [USER]/[CARD] buttons to make your
choice.
The current/next displays will show something like the
following.
Example: For USER SAMPLE 0001
fig.04-027
3.
Use the VALUE dial or [INC] [DEC] to select the desired
patch.
Sample patch number