Track Recording System (Tascam Da-88 X 3) - Roland V-Mixer VM-C7100 Quick Start Manual

Connection Samples

24 Track Recording System (TASCAM DA-88 x 3)

• This is a 24 Track Recording System with three TASCAM DA Series recorders in use.
• You can record to individual tracks on 22 analog channels + 2 digital channels at once.
• You can mix 22 analog channels + 2 digital channels + 24 tape channels at once.
• You can control the recorder's Transport and the tracks' REC switch on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the "LEVEL METER".
• Turn the power on in the [DA Series]–[VM Series] order.
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the "LEVEL METER".
• The VM-7000 Series cannot be used as the Word Clock Master.
90
SYNC SYNC SYNC
IN OUT IN
DA-88 DA-88
TDIF-1
TDIF-1
SYNC
DIF-AT DIF-AT
R-BUS(RMDBII)
MULTI 1-8
I/O Expansion Board
VM-24E
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
Processor
VM-7200
VM-LINK
ANALOG Console
2 INPUTS
VM-C7100/C7200
MIDI
OUT
MIDI
IN
Level Meter Bridge MB-24
SYNC SYNC
OUT IN
DA-88
TDIF-1 TDIF-1
TDIF-1 TDIF-1
DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 9-16
MULTI 17-24
MIDI
OUT
MIDI
IN
SEQUENCER/PC