Before Mixing Operations; Internal Signal Flow; Input Channels - Roland V-Mixer VM-C7100 Quick Start Manual

Before Mixing Operations

Internal Signal Flow

The diagram below provides an overview of the audio signal flow. For
details, refer to the "Block Diagram" attached to the processor (VM-7200/
7100).
fig.104
MULTI IN
1–24
INPUT
1–24
1

1. Input Channels

There are two input modes to this system – [INPUT] and [MULTI IN].
INPUT...1-24
The following input jacks can be assigned to these channels:
• 20 analog input jacks on the VM-7200 mixing processor (10 on VM-
7100).
• Stereo digital input jacks on the mixing processor (A or B)
• 2 analog input jacks on the mixing console (stereo L/R).
MULTI IN...1-24
Multi-channel audio signals can be input from external equipment – such as
multi-track recorders – via these channels.
The correspondence between input signal channel numbers and Multi In
channels can be re-patched internally.
22
R-BUS
MULTI OUT
1–24
FLEX BUS MASTER
1–12
B
U
S
MAIN OUT
L/R
CUE OUT
L/R
2
In order to use Multi In
channels, a VM-24E (sold
separately) must be
connected to the mixing
processor in order to add
an R-BUS connector I/O
terminal (OWNER'S
MANUAL for the
Processor: p.14).