Roland V-Mixer VM-C7100 Quick Start Manual page 69

1
Press [FADER GROUP MASTER 1-24]
The "FADER GROUP" display appears – the faders now function as Fader
Group Masters.
2
Press [CH EDIT] of the Fader Group you wish to edit.
The "CH EDIT" display appears with the Fader Group setting screen.
fig.220
3
In the lower right "GROUP VIEW" field of the screen, use
CURSOR [UP] [DOWN] [LEFT] [RIGHT] to select a set of six
channels containing the first channel you wish to include in
the group.
4
Press [F1]-[F6] to turn ON (black highlight) / OFF (normal) the
desired channel faders. Then repeat Steps 3-4 to register all of
the desired channels in the Fader Group selected in Step 2.
If you want to register or change another Fader Group, start over from Step
2.
To change the levels of channels registered in the group, press [FADER
GROUP MASTER 1-24] to light [FADER GROUP MASTER 1-24], and use
the group's master fader.
Other Important Features
You can also mute a Fader
Group in the same way as a
normal channel by pressing
[MUTE] (QUICK START:
p.38).
69