Track Recording System (Tascam Da-88 X 6 + Rc-848) - Roland V-Mixer VM-C7100 Quick Start Manual

48 Track Recording System (TASCAM DA-88 x 6 + RC-848)

RC-848
SYNC SYNC SYNC
IN OUT IN
DA-88
TDIF-1
TDIF-1
DIF-AT
SYNC
R-BUS(RMDBII)
MULTI 1-8
I/O Expansion Board
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS Processor
VM-LINK
Console
ANALOG
2 INPUTS
VM-C7100/C7200
MIDI
OUT
MIDI
IN
Level Meter Bridge MB-24
• This is a 48 Track Recording System with six TASCAM DA Series recorders in use.
• These recorders are controlled by the RC-848.
• You can record to individual tracks on 42 analog channels + 4 digital channels at once.
• You can mix 42 analog channels + 4 digital channels + 48 tape channels at once.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the "LEVEL METER".
• Turn the power on in the [DA Series]–[VM Series] order.
• 50 Scenes can be stored per Project (because of cascade connection).
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the "LEVEL METER".
• Connect the SYNC cable to DIF-AT connected MULTI 1-8 on the Master processor.
• The VM-7000 Series cannot be used as the Word Clock Master.
SYNC SYNC SYNC
OUT IN OUT
DA-88 DA-88
TDIF-1 TDIF-1
TDIF-1 TDIF-1
DIF-AT DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 9-16 MULTI 17-24
VM-24E
Cascade Kit
VM-24C
VM-7200
(MASTER)
MIDI
OUT
MIDI
IN
SEQUENCER/PC
SYNC SYNC SYNC
IN OUT IN
DA-88 DA-88
TDIF-1 TDIF-1
TDIF-1 TDIF-1
DIF-AT DIF-AT
R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 1-8 MULTI 9-16
I/O Expansion Board
VM-24E
Processor
Cascade Kit
VM-24C
VM-7200
(SLAVE)
Connection Samples
SYNC SYNC SYNC
OUT IN OUT
DA-88
TDIF-1
TDIF-1
DIF-AT
R-BUS(RMDBII)
MULTI 17-24
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
89