Replacing The System Fans - HP zx2000 Technical Reference Manual

4. Unscrew the fan cover (A), lift it off of the fan enclosure (B), and move it to the side.
Removing the System Fan Cover
5. Grasp the fan enclosure firmly and pull it out of the system chassis.
Removing the System Fans

replacing the system fans

1. Grasp the replacement fan module firmly and insert it into its fan slot.
2. Re-attach the LED status panel and all cables, replace the system covers, and turn on the
system.
3. Verify that the fans have been properly installed by verifying that none of the Diagnostic
LEDs on the front of the system are lit.
technical reference guide
A
Installing or Replacing Parts and Accessories
B
2–25