Events Without Sensors - HP zx2000 Technical Reference Manual

Event, Error and Warning Messages

events without sensors

The BMC logs these events with a "sensor number" of 0. There is no matching SDR entry.
Triplet Event
10:70:64 SEL almost full
12:70:80 BMC entering special mode
12:70:A1 BMC firmware initializing
1D:70:00 BMC cold reset
1D:70:01 BMC warm reset
1D:70:02 BMC cold reset after SDRR update
D–8
data2 data3
1F %full
Mode –
Major FW rev Minor FW rev
Notes
The BMC logs this when
the SEL is 75% full
Mode is a bit-map:
Bit 0: Shmoo
Bit 1: MfgTest
Bit 2: Shutdown override
Bit 3: Fixed fan speed
Bit 4: Mfg
Bits 7-5: unused, set to 0
technical reference guide