Product Information
front panel
The hp workstation zx2000 front panel has the following features:
■
Two front-access USB connectors.
■
Two front-access optical drive bays.
■
Power Button turns the system power on or off.
■
Power LED is green when the power is on or the power button is pushed in. If the power is
on and the button is pushed in, the light will stay on even after the system is powered down.
When the button is released, the green light turns off.
■
Activity LED indicates whether the system is accessing any of the hard drives or optical
drives (IDE or SCSI). If the LED is:
❏
off, the system is off, or the system is not accessing internal drives
❏
blinking green, the system is accessing an internal drive
NOTE: The Activity LED automatically communicates with IDE hard drives or optical drives.
To communicate with SCSI drives, a SCSI LED activity cable must connect the SCSI card and
the system board. The Activity LED is active only on systems purchased after March 2003.
■
System and Diagnostic LEDs provide information about system errors.
■
Locator Button and LED (rack-mount configuration only) identifies the rack position of
the workstation.
1–6
technical reference guide