Replacing The Covers - HP zx2000 Technical Reference Manual
Hp zx2000: reference guide
Hide thumbs
Also See for zx2000:
- Supplementary manual (66 pages) ,
- Getting started manual (63 pages) ,
- Setup and troubleshooting manual (46 pages)
Table of Contents
Advertisement
Installing or Replacing Parts and Accessories
replacing the covers
1. Align the right edge of the metal cover with the blue line on the system chassis.
Align the Metal Cover
2. Place the metal cover on the chassis and slide it toward the system front panel.
Replace the Metal Cover
3. Tighten the two blue screws on the cover near the rear panel of the chassis.
4. Rackmount system: Slide the system inward until the glide-rail retainers latch.
2–8
technical reference guide
Advertisement
Table of Contents
Troubleshooting
