Using The Security/Password Menu - HP zx2000 Technical Reference Manual

using the security/password menu

To change the administrator and user passwords:
Security/Password Menu
1. Select
2. Select either:
❏ Set Administrator Password
❏ Set User Password
3. Select:
❏ Set Administrator Password
❏ Enable/disable Password
❏ Help
4. When you are finished, select
If you forget your passwords, they can be reset using a jumper on the system board.
To reset the system passwords:
1. Power down the system and unplug the AC power cord.
2. Place a jumper between pins 7 and 8 on J47 on the system board.
7
Password Reset Jumper and BMC Heartbeat LED
1
J47
2
BMC heartbeat LED (between BMC and battery)
technical reference guide
for assistance
Exit
8
.
Set User Password
or
to specify whether a password is required
.
1
System Configuration
to set a new password
2
3–21