Hard Drives - HP zx2000 Technical Reference Manual

Installing or Replacing Parts and Accessories

hard drives

removing a hard drive
1. Turn off the system, disconnect all cables, and remove the system covers.
2. Disconnect the hard drive power connection and IDE or SCSI cable.
1
Disconnect the Drive Cables
1 Power cable
2 IDE or SCSI cable
3. Raise the hard drive cage:
a. Depress the blue latch.
b. Lift up the hard drive cage until it snaps into the upright position.
Lifting the Hard Drive Cage
2–20
2
B
A
technical reference guide