Optical Drives (Cd Or Dvd) - HP zx2000 Technical Reference Manual

optical drives (CD or DVD)

removing an optical drive
1. Turn off the system, disconnect all cables, and remove the system covers and front bezel.
2. Disconnect the power, IDE and audio cables from the back of the optical drive.
NOTE: The audio cable has a small release clip on the side of the connector. Squeeze in on the
connector and pull gently to remove it from the drive.
Disconnecting the Cables
1
Audio
2
IDE
3
Power
3. Release the small blue retainer clips on both sides of the optical drive by pressing in on them.
Releasing the Optical Drive Retainer Clips
4. Slide the optical drive forward and pull it out of the drive bay.
technical reference guide
3
1 2
Installing or Replacing Parts and Accessories
2–17