select active console output devices
Use this option to define the devices that will display output from the system console. This list
normally includes the VGA monitor and a serial port for directing output to a terminal emulation
package.
NOTE: If you are installing a modem in your system, make sure you disable the modem serial
port from the Active Console Input and Active Console Output device lists.
NOTE: Some Operating Systems support multiple consoles, such as a simultaneous serial and
VGA output. This is not supported for HP-UX. See your OS documentation to determine how
many consoles are supported with your system.
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
* Acpi(HWP0003,0)/Pci(0|0)
Save Settings to NVRAM
Exit
* indicates a currently selected device.
This menu is identical to
configurations for Output and Error console. For correct operation:
■
When changes are made to either Output or Error console menus, the identical change must
be made in both menus.
■
When changing serial devices, changes must be made to Output, Input, and Error menus for
proper operation.
technical reference guide
Console Error Devices
. The zx2000 does not support different
System Configuration
3–17